Poducts

  • Oxidative precipitation recovers nickel and cobalt from ore

    Most existing process plants for nickel laterite ores use intermediate precipitation processes to recover the nickel and cobalt from the leach solution. The precipitation produces an intermediate product of nickel and cobalt, either as mixed sulfide precipitate (MSP) or mixed hydroxide precipitate (MHP), while largely separating nickel and cobalt from impurities such as manganese, calcium and

  • EP1159461A1 Recovery of nickel and cobalt from ore

    A process is provided for the selective recovery from an impure solution of pure nickel and cobalt solutions, suitable for electrolysis of the respective metals. The impure solution may be that obtained from acid leaching of nickel/cobalt bearing laterite or oxide ore. The impure solution is contacted with a solid ion exchange resin to selectively extract nickel and cobalt, while rejecting at

  • Cited by: 28
  • Accelerated carbonation of mining waste may be used to

    13/09/2020· “If you can integrate carbon capture with the recovery of previously inaccessible minerals, say of nickel and cobalt, you could make some lower grade mines more viable,” said Jessica Hamilton

  • RECOVERY OF NICKEL AND COBALT FROM ORE William

    [0047] To recover the nickel and cobalt from the nickel and cobalt loaded resin, it is eluted with a strip solution 3 (103) to form an ion exchange eluate solution 4 (104 a, 104 b, 104) containing a soluble nickel salt and a soluble cobalt salt. Before eluting the nickel and cobalt, the resin may be washed with water to remove entrained raffinate solution. Where more than one ion exchanger is

  • Cobalt and Nickel Recovery From Missouri Lead Belt

    Cobalt and nickel recovery from Missouri lead belt chalco­ Most of the cobalt and nickel in the Lead Belt ore is present as the min­ eral siegenite, (Ni,Co)3S4 ' Siegenite is a member of the linnaeite series of minerals and sometimes contains some copper and iron. In Missouri ores, the cobalt-nickel-bearing minerals are best characterized by a complex interlock­ ing of siegenite with

  • 文件大小: 1MB
  • Leaching and ion exchange based recovery of nickel and

    01/01/2020· The paper presents the outcomes of exploratory research relating to the atmospheric pressure and ambient temperature leaching of nickel and cobalt from a Western Australian low grade, disseminated, nickel-cobalt sulfide ore, and the subsequent recovery using ion exchange (IX) using alkaline glycine solutions in mildly oxidizing environments. The results present a foundation for a

  • Cited by: 2
  • Metal Recovery | Clean TeQ Water

    The ore will be crushed, beneficiated and thickened prior to entering the pressure acid leaching (PAL) circuit, where nickel, cobalt and scandium are extracted from the ore into a leached solution. This then enters Clean TeQ’s patented CLEAN-IX ® continuous resin in pulp process, where nickel and cobalt are selectively extracted at a high rate of recovery (>99%) into a concentrated solution.

  • (PDF) Potential for cobalt recovery from lateritic ores in

    Co-bearing nickel laterite ores being mined in Greece, Macedonia and Kosovo where the cobalt is currently not being recovered (ores have typical analyses of 0.055% Co and >1% Ni,). These ores are

  • Accelerated carbonation of mining waste may be used to

    13/09/2020· “If you can integrate carbon capture with the recovery of previously inaccessible minerals, say of nickel and cobalt, you could make some lower grade mines more viable,” said Jessica Hamilton

  • EP1159461A1 Recovery of nickel and cobalt from ore

    A process is provided for the selective recovery from an impure solution of pure nickel and cobalt solutions, suitable for electrolysis of the respective metals. The impure solution may be that...

  • US3714326A Recovery of nickel and cobalt from

    In an ammoniacal leaching process for the recovery of nickel and cobalt from reduced nickeliferous ores, copper contamination of the product liquor may be minimized or substantially avoided by...

  • Leaching and ion exchange based recovery of nickel and

    01/01/2020· The paper presents the outcomes of exploratory research relating to the atmospheric pressure and ambient temperature leaching of nickel and cobalt from a Western Australian low grade, disseminated, nickel-cobalt sulfide ore, and the subsequent recovery using ion exchange (IX) using alkaline glycine solutions in mildly oxidizing environments. The results present a foundation for a

  • cobalt processing | Uses, Supply, & Facts | Britannica

    In nickel smelting, most of the cobalt is recovered during electrolytic refining of the nickel by precipitation from solution, usually as a cobaltic hydroxide. But even in nickel smelting, cobalt starts to oxidize before the nickel and can be recovered from the final converter slag. In the ammonia pressure leaching of nickel, cobalt is recovered from solution by reduction with hydrogen under

  • JOM 0610: Cobalt-Its Recovery, Recycling, and Application

    As shown in Figure Aa, the cobalt recovery process is based on the continuous selective oxidation and hydrolysis of cobalt from relatively impure nickel electrolyte. Cobalt-bearing slime, containing 8–10% Co, 28–34% Ni, 0.4–0.8% Cu, and 5–6% Zn, is treated by selective reduction with sulfur dioxide to solubilize the cobalt and nickel to thus separate them from the iron and some of the

  • (PDF) Potential for cobalt recovery from lateritic ores in

    Co-bearing nickel laterite ores being mined in Greece, Macedonia and Kosovo where the cobalt is currently not being recovered (ores have typical analyses of 0.055% Co and >1% Ni,). These ores are

  • NICKEL AND COBALT ORES: FLOTATION

    DETA, does not affect the recovery of chal-copyrite. Figure 3 shows that 93% of chalcopyrite can be recovered in 12 min in the presence of SO 2, but the co-recovery of 12% pentlandite and 23% 3492 III/NICKEL AND COBALT ORES: FLOTATION

  • How Is Cobalt Extracted?

    14/07/2020· Cobalt is found in cobaltite, smaltite and erythrite as well as silver, nickel, copper and iron ores. Cobalt ore deposits have been discovered in Canada, Morocco and the bottom of the Pacific Ocean near Hawaii. It is usually mined as a by-product of copper or nickel. The ore mined usually only contains 0.1 per cent of cobalt. Cobalt is an essential element for all multicellular organisms. It

  • cobalt recover from nickel ore hotelgastroservice.cz

    [0047] To recover the nickel and cobalt from the nickel and cobalt loaded resin, it is eluted with a strip solution 3 (103) to form an ion exchange eluate solution 4 (104 a, 104 b, 104) containing a soluble nickel salt and a soluble cobalt salt. Before eluting the nickel and cobalt, the resin may be washed with water to remove entrained

  • Extraction of nickel and cobalt from nickeliferous

    10/10/2017· The present study proposes a new smelting process for limonitic nickeliferous laterite ore in order to separate nickel and cobalt from the ore and produce a nickel matte at lower smelting temperature compared with the current industrial techniques. The nickel and cobalt recoveries were evaluated at various flux additions. The highest recovery condition for Ni (98% Ni recovery with Ni content of 10

  • cobalt processing | Uses, Supply, & Facts | Britannica

    In nickel smelting, most of the cobalt is recovered during electrolytic refining of the nickel by precipitation from solution, usually as a cobaltic hydroxide. But even in nickel smelting, cobalt starts to oxidize before the nickel and can be recovered from the final converter slag. In the ammonia pressure leaching of nickel, cobalt is recovered from solution by reduction with hydrogen under pressure. In refineries using a

  • JOM 0610: Cobalt-Its Recovery, Recycling, and Application

    As shown in Figure Aa, the cobalt recovery process is based on the continuous selective oxidation and hydrolysis of cobalt from relatively impure nickel electrolyte. Cobalt-bearing slime, containing 8–10% Co, 28–34% Ni, 0.4–0.8% Cu, and 5–6% Zn, is treated by selective reduction with sulfur dioxide to solubilize the cobalt and nickel to thus separate them from the iron and some of the

  • How Is Cobalt Extracted?

    14/07/2020· Cobalt is extracted from the nickel or copper through solvent extraction, which is separating compounds based on their solubility in two immiscible liquids, such as an organic solvent and water. Hence, it extracts the cobalt substance from one liquid into another liquid phase. Or, cobalt is extracted through smelting, using heat from a blast furnace and a metal reducing agent, such as carbon, to

  • Nickel recovery from a high ferrous content laterite ore

    A process is described for the recovery of nickel and/or cobalt from laterite or partially oxidized lateritic ores having a substantial proportion of the iron present in the ferrous state. The process includes providing a laterite or partially oxidized laterite ore wherein a substantial proportion of the iron present in the ore is in the ferrous state; acid leaching the ore to provide a product leach solution containing at

  • Why the world is demanding more cobalt, and why new

    29/09/2017· Fig. 1: Generalized Flow Sheet of Copper/Cobalt/Nickel Recovery (Fisher, 2011) When designing processes for cobalt recovery, it is important to analyze and overcome some of the technical challenges that lie ahead. In terms of impurities, manganese is the most troublesome impurity for cobalt recovery, specifically from copper-cobalt ores, in which Mn is present in high quantities. Air/SO 2 or

  • The nickel laterite challenge Australian Mining

    21/06/2012· The issue of recovery of the value metals, nickel and cobalt from the solution remains. This includes post major impurity (mainly iron) removal as an economic improvement to

  • A New Process for Cobalt Nickel Separation

    A New Process for Cobalt – Nickel Separation By D.L. Jones 1, T.M. McCoy , K.E. Mayhew1, C.Y. Cheng 2, K.R. Barnard , W. Zhang2 Presented by David Jones [email protected] ALTA 2010 Perth, WA, Australia May 25, 2010 1 CESL Limited, Richmond, BC, Canada 2Parker Centre/CSIRO Minerals Down Under, Perth, Australia . A New Process for Co-Ni Separation – ALTA 2010 2

  • NiWest Nickel-Cobalt Project, North Eastern Goldfields

    13/10/2020· The processing plant will have a capacity of 2.4Mtpa and is expected to recover 79% of nickel and 85% of cobalt. The ore will undergo two-stage crushing to produce a -50mm product, followed by agglomeration and heap leaching. Calcrete will be added to the pregnant leach solution (PLS) from heap leaching in order to remove residual acid and precipitate 99.9% of the Fe and Al. “It is

  • REVIEW OF THE PAST, PRESENT, AND FUTURE OF THE

    For many years, the nickel and cobalt were dominantly produced pyro-metallurgically from the sulfide ores. The nickel sulfide ores account for approximately 30 % of the global nickel deposits, the rest of the nickel in Earth’s crust is contained in laterites – an oxide ore. Nickel production from sulfide ores is reaching a plateau, and a